What is the negative water pressure system, how to avoid a painting ..

Buildings, soil, the roof, the north front of the (blind from the front) ... the water input, do not be adequate insulation or by the sea, in the basement wall in the house of the negative impact on the type of moisture is called. Buildings, plaster-wall built up after a certain period of time the moisture in the paint: upsurge, outpouring causes mold-bacteria formation. To resolve this problem, first determine the source of the problem of trying to be and should be corrected. However, in some cases, it is not possible to solve the problem of resources. This type of situation to the surface, DYOSTOP product should be applied. Dyostop Dr. DYO series products and Pilioway containing resin and blocked the ability of moisture is a product.

In practice, there are points to consider:
1-surface must be starving to plaster.
2 - Wet the areas to be established mild, dry and light the place should be dampened.
3 - local intervention, but a large area as possible should be applied to the paint.
4 - Moisture consumption is very important to be blocked, a total of 600 g/m2 twice should be transferred to the surface paint.
5 - can not be Colored.
6 - Do not forget that: Dyostop 3psiwqxlık is based on pressure, that prevents the dripping point improvement in the water, higher pressure water to improve the expected performance is not observed.

/ Favorite Paint / Specialist paint or..