|
Products and should help to note that the points (Roll, Brush, Silicone, Foam, masking tape)
Roller: Long hairy rolls (18-24 mm) to plastic and paint facades, short feathered rolls (10-12 mm) are eligible to apply satin paint. Mercan rolls with noise (tekstürlü) is designed for the implementation of the paint.
Roll cleaning, water-based paint from the use of wash and then roll the paint on the soapy rinse the reels in the future as the store down. Synthetic-based paint is used; rolls are taken as closely as possible to dodge the remaining paint and synthetic soapy water after cleaning with paint thinner geçirilerek; cylinder is retained by the original way. To be used before re-use should be moistened with paint thinner to ..
Brush: a new brush to get the dust and poor hair to shed and shake the dust must be taken to be bent manually. To practice before the new brush should be used in coatings. Brush to paint the way to half the hair length should be sunk upright, the box edges to prevent the flow of paint must be more to take.
Paint brush for the paint job is given to the search must not be left upright on paint box should be horizontally. Paint the ground to get the dust or brush should not be used for mixing the paint to be used.
Cleaning brush, paint brush is used with the thinner (water, synthetic thinner) should be cleaned. Water is cleaned with the bristles facing down to be stored in original, re-use, is in the water to wet hair sağlanmalıdır.Tiner cleaned with paint thinner in the brush again after diving into the brush to the back of our hands clean with paint thinner can be used. (if the remaining thinner brush will clean the paint for the first time need to review more than the unwanted can cause problems) If you used the brush for a short time (2-3 days) will be used again without cleaning the hair with a bag is closed and tightly connects the hair to dry to prevent.
Door and window joinery ½ in, 1,1.5 inch brushes, wide doors and to painted wood surfaces: 2,2.5 and 3-inch brushes Parke and wall surfaces of 4.5-inch brush, Shortcut cut in various sizes to use the brush keeps the application easy. In addition to central heating radiator paint brush back and play for the various angles at the various numbers is available in brushed robot.
Note: 1 inch, and 2:54 cm is the width of the brush is certain.
Silicon: Single-component, antibacterial, quick drying, excellent adhesion and high-tech seal provides silikondur.Cam, pvc, metal, wood, tile in bathrooms and kitchens, sinks, bathtubs, shower cabin, sanitary installation and repair of components in the adhesion, and water filling with the purpose of insulation is used. Gun for use with your own custom silicon. Plastic tubes used to cut the end of the bar to be used by attaching to the surface and is cut by falçata and is applied by the gun and bored. Be applied to protect surfaces with masking tape should be taken during application, especially digital editing and plastic gloves should be used always.
Betek Poliköpük: Polyurethane-based single-component foam is ready to use hardening with moisture. Polyethylene, and teflon slikon into the construction materials of all kinds, except has the power. Floor must be clean and oil will be used, must be protected tapes off the surface should be dampened surfaces must be dry.
Apply the product before the shaking vigorously 30-40 times. While the open box and the vertical application space bar to turn down the head vidalayınız.Kutuyu upward until 1/3ü fill. Do not leave exposed to direct sunlight. While acetone can be removed with the help of years. Approximately 10 minutes will be cut scab material is 1-1,5 hours to dry, and within 24 hours by full becomes completely hard.
Masking tape application make sure the surface dry.
Until 1-2 hours during the 70 ° Cye automobile painting in the mind do not stay in the oven.
Emery: Paint and putty application, or glossy surface to surface to fix the applications, and flatten the surface material used for the purpose of increasing aderansı.
-Wall correction procedure for priming of emery nolu 80-120,
Mat of bright paint-old for 120-200 allocated to the process of sandpaper,
-Furniture group paint, primer and filler material between the floor 400 to process the glass is recommended to be allocated the use of sandpaper.
Numbers indicate the range of sand of sandpaper. Large numbers of fine emery wheel; small numbers are thick emery wheel.
/ Favorite Paint /
|