..: Pre-Paint Surface Preparation :...

Gypsum Plaster



New Wall
All nail holes and scratches fill-screw 180 with the correct number sandpaper. Sanding dust and clean the surface of the lining painted here.

Painted Wall
Oil and dirt on the surface may be washed with soapy water and rinse the. Cracked or peeled paint with a brush and scratch setaceous. Plaster or putty holes using one of the appropriate POLİSANın off and then sanding to fix here.

2. Wood



New Wood
Normally the raw wood, primers were shot is ready for varnish. However, defects may reduce the life of the paint. If the nail holes, combined with the place and fill MACUN SUPER POLİSAN defects. Fill with dry sandpaper after number 220 in the direction of life (water) obtain a surface smooth by sanding. A damp cloth to remove dust. After that level, it is ready for lining.

Painted Wood
Eliminating the old coat of paint to the wood surface smoothness necessarily in the direction of fibers, so the water is sanding. Blotchy or weeping from the surface of the paint brush to clear the board setaceous and trim edges with sandpaper. Groove and hole using SUPER MACUN POLİSAN close. Finally, sandpaper to clean the dust from this process can use a proper title for your vacuum cleaner.

Cabinet Covers
Cabinet hinges and drawer handle and remove the masking tape to close by ..

/ Favorite Paint /